# An example configuration for an Arduino, replace the IP addresses (and pins
# if needed) with the values matching your own hardware before use.

title = "this is the configuration file of the plugin Arduino"
com_port = "COM24"
ip_address = "192.168.1.50"
ip_port = 31336

[presets]
preset_for_colorsynthesizer = "ArduinoLED"

[LCD]
address = 39
cols = 16
rows = 2

[servo]
pin = 2
pos_1 = 55
pos_2 = 80

[esp32]
ip_address = "192.168.1.51"

[max31865]
sck_pin = 48
miso_pin = 47
mosi_pin = 38
cs_pin = 21

[esp32.pins]
heater_pin = 18
fan_pin = 17

[LED.pins]
red_pin = 6
green_pin = 4
blue_pin = 5

[FanHeater.pins]
heater_pin = 9
heater_fan_pin = 8
